Post by somrat6islam222 on Feb 18, 2024 12:41:12 GMT 1
Sources after the Second World War , mostly coming from oil, this way of obtaining energy was put aside. In the s , with the oil crisis, the most powerful urban networks in the world returned to this system. Among them, the United States, northern Europe, Russia, Japan or Korea. In Spain, the implementation of this method appears in , in the thermal power plant of the University City of Madrid. Characteristics of the Centralized Heating Network centralized-urban-heating-network Source: Vox The District Heating system is mainly made up of three components that we will analyze below.
In addition, it can also be combined with different renewable energies . District Heating Components Thermal power plant There are different types, depending on the sources used, that is, the fuel . The two most used types of fuel are gas and Phone Number List biomass. This heat factory will have all types of pumping groups and machinery necessary for heat generation. They work automatically , depending on demand. That is, as the number of homes increases, the control system registers it and produces more thermal energy. Distribution network It is based on a network of thermally insulated pipes , thus avoiding heat loss.
This network is made up of two tubes, one for the outward route and the other for the return. This method also helps reduce construction costs , since the hot water distribution network replaces the gas network. In addition to taking advantage of the water supply ditches. Thermal transmission substations They are installed in parallel distribution networks . This allows all buildings to have the same supply conditions. It is a heat exchange system , through which heat is transferred to the heating elements and domestic hot water of each home. In this way, the combination with other energies and other devices that provide heat is also possible, such as the biomass boiler .
In addition, it can also be combined with different renewable energies . District Heating Components Thermal power plant There are different types, depending on the sources used, that is, the fuel . The two most used types of fuel are gas and Phone Number List biomass. This heat factory will have all types of pumping groups and machinery necessary for heat generation. They work automatically , depending on demand. That is, as the number of homes increases, the control system registers it and produces more thermal energy. Distribution network It is based on a network of thermally insulated pipes , thus avoiding heat loss.
This network is made up of two tubes, one for the outward route and the other for the return. This method also helps reduce construction costs , since the hot water distribution network replaces the gas network. In addition to taking advantage of the water supply ditches. Thermal transmission substations They are installed in parallel distribution networks . This allows all buildings to have the same supply conditions. It is a heat exchange system , through which heat is transferred to the heating elements and domestic hot water of each home. In this way, the combination with other energies and other devices that provide heat is also possible, such as the biomass boiler .